ARGB Lighting Each Lian Li UNI FAN SL-INF 120 is equipped with 40 ARGB LEDs, embedded in the frame and central hub. Maximizing brightness, these LEDs have been paired with an infinity mirror to create an incredible lighting effect. The infinity mirror is layered, with 0.5 mm breaks adding definition that can be seen from any angle. The 3D effect and geometric frame shape culminate in a bold aesthetic that works in every gaming PC. Plus, the aluminum trim reflects the effect further, meaning the lighting is visible on both edges and sides of the frame. Lighting and fan control are achieved through Lian Li's updated L-Connect 3 software, or your motherboard software for the singular fans. Each cluster can be assigned a fan speed or set to specific modes to best suit your needs. When it comes to lighting, there are over 30 effects to experiment with and the whole spectrum of 16.8 million colours. Effects can be assigned to the fan's center only, fan edge only, or a combination of the two. With such amazing flexibility, the Lian Li UNI FAN SL-INF 120 can be home to some amazing light shows. Specifications:      Dimensions: 120 x 122.1 x 25 mm (W x H x D)      Materials:PBT, aluminum      Colour: Black      Fan:      Bearing Type: Fluid Dynamic Bearing      Fan Speed: 200 – 2,100 RPM      Acoustic noise: max 29 dB(A)      Airflow: max 61.3 CFM (104.14 m³/h)      Air Pressure: max 2.66 mmH2O      Operational Voltage: 12V      Starting Voltage: 6V      Input Current: 0.18A      Input Power: 5.16W      Lighting:      Type: digitally addressable RGB      No. of LEDs: 40      Input Current: 0.6A      Connection: 7-pin combined PWM ARGB      Controller connections:      4x 7-pin combined ARGB and PWM      2x 3-pin SM JST for ARGB components      2x SATA (max. input 29 watts)      1x 9-pin USB to connect a 9-pin header on motherboard      3-pin 5V ARGB a

Item Shape Round Dial Window Material Type Glass Display Type Analog Clasp Type Tang Buckle Case Diameter 27 millimetres Case Thickness 8.00 Band Material Faux Leather Band Length Children’s Band Width 18 millimetres Band Colour Pink Dial Colour Multicolour Movement Quartz

Kolink gave the Inspire K2 ARGB something that helps it stand out from the crowd: the front is equipped with a striking design as well as an ARGB-LED strip which can be controlled via the I/O panel. Together, the front is reminiscent of a printed circuit board or a scene from one of the Tron films. The almost invisible recesses also serve to allow fresh air into the case. The tinted tempered glass side panel offers users a view of the interior, specifically of the Micro-ATX motherboard. Naturally this Micro-ATX case supports powerful hardware and plenty of drives that would combine to make this an exceptional gaming system. This makes the Kolink Inspire K2 ARGB one of the ideal cases for gamers on the lookout for something with great value and an eye for unusual designs.The Kolink Inspire K2 ARGB Micro-ATX Case:Strikingly shaped front with ARGB lightingTempered glass side panel and PSU slot in the topSpace for 1x 120mm fan in the front and 1x 92mm fan in the back (pre-installed)Space for graphics cards up to 320mm and CPU coolers up to 150mmI/O Panel with one USB 3.0, one USB 2.0 and RGB-LED controlsRear 92mm Fan pre-installedLight and easy to transport at just 3.9kgValue Micro-ATX Case from Kolink for GamersThe Kolink Inspire K2 ARGB is an extremely affordable Micro-ATX case that is, in style terms, oriented more towards gamers. It can fit graphics cards up to 32cm in length. What is particularly striking about it however, is the front with its angular aesthetics as well as its PCB-inspired look complete with cutouts to help draw air into the case. The look of the front is accentuated by the addition of semi-transparent strips, behind which lies an ARGB-LED strip. At the top towards the front lies the USB 2.0- and USB 3.0 connection as well as RGB lighting controls. A tinted, tempered glass side panel helps to round out the stylish design of the Inspire K2 ARGB. The interior of the case provides space for Micro-ATX or Mini-ITX motherboards. Graphics cards can be up to 320mm long, and CPU coolers are limited to 150mm, meaning that there is more than adequate space for mainstream coolers. In terms of cable management, the cover on the right side is curved to provide that bit of extra space. The front allows for a 120mm fan. There is space for a 92 mm fan at the back.Towards the top/front of the case lie two slots, the top one can hold a 3,5- or 2,5″ drive. Under this, in the second slot, there is space for a 2,5″ SSD. At the bottom, users have the option of installing another 3,5- or 2,5″ drive.Technical Details:Dimensions: 382 x 188 x 393 mm (W x H x D)Material: Steel (case), tempered glass (side panel), plastic (front)Weight: approx. 3,9 kgColour: BlackForm factor: Micro-ATX, Mini-ITXTotal possible fans:1x 120 mm (front)1x 92 mm (rear) (pre-installed)Radiator Mountings:1x max. 120 mm (front)Drive Bays:2x 3,5/2,5″ max. (internal, upper cage, bottom)1x 2,5″ max. (internal, lower cage)PSU: 1x Standard ATX (optional)Expansion slots: 4I/O Panel:1x USB 3.01x USB 2.02x 3,5 mm jack (1x Audio-In / -Out)RGB controlMax GPU length: 320 mmMax CPU cooler height: 150 mm